PT Cruiser L4-2.4L Turbo (2009)
Glove Compartment Lock Cylinder: Service and Repair
Glove Box Lock Cylinder - Removal
REMOVAL
1. Remove the glove box latch (1) from the glove box door and place it on a workbench See: Service and Repair/Glove Box Door Latch - Removal.
2. Insert the ignition key (2) into the glove box lock cylinder (3) and rotate the ignition key 90 degrees clockwise.
3. Using a small pointed tool, press in on the lock pin (1) showing through the opening in the glove box latch housing (2) and rotate the ignition key
(3) an additional 45 degrees clockwise.
