PT Cruiser L4-2.4L Turbo (2009)
5. Install the side J-strap.
6. Install the front J-strap (2).
7. Install push pins (1).
8. Install the seat back. See: Seat Back/Service and Repair/Seat Back - Installation/Front.
9. Install the seat into vehicle See: Service and Repair/Seat, Front/Seat - Installation.
Rear
COUPE
1. Position seat cover on cushion.
2. Align seat cover with cushion alignment indentations.
3. Install hog rings.
4. Engage J-strap attaching seat cover to cushion frame.
5. Install rear seat and track assembly. Tighten front track to pan bolts to 12 Nm (9 ft. lbs.).