PT Cruiser L4-2.4L Turbo (2009)
c. With the brake pedal in the fully released position, move the lever on the back of the stop lamp switch from the non-adjusted angle position to
the full vertical position. This will permanently adjust the switch to the vehicle.
12. Install the knee blocker.
13. Install the silencer pad below the knee blocker.
14. Connect the battery negative cable (1) to its post on the battery (4).
15. Install the air cleaner cover.
16. Check the stop lamps to verify they are operating properly and not staying on when the pedal is in the released position.
17. Road test the vehicle to ensure proper operation of the brakes and speed control (if equipped).
With Manual Transaxle
WITH MANUAL TRANSAXLE