PT Cruiser L4-2.4L Turbo (2009)
8. Slide the hub and bearing (4) onto the spindle.
9. Install a NEW hub nut (2) on the spindle. Tighten the nut to 217 Nm (160 ft. lbs.).
10. Install the hub and bearing dust cap (1).
11. Adjust the brake shoes to the drum diameter using a brake shoe gauge. See: Adjustments
12. Install the brake drum (3). See: Brake Drum/Service and Repair/Removal and Replacement/Installation
13. Install tire and wheel assembly (1) See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels -
Installation. Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
14. Slowly rotate both rear wheels and verify that the brake drums lightly drag on the shoes.
15. Lower the vehicle.