PT Cruiser L4-2.4L Turbo (2009)
9. Slide the hub and bearing (4) onto the spindle.
10. Install a NEW hub nut (2) on the spindle. Tighten the nut to 217 Nm (160 ft. lbs.).
11. Install the hub and bearing dust cap (1).
12. Adjust the brake shoes to the drum diameter using a brake shoe gauge. See: Brake Shoe/Service and Repair/Procedures/Inspection
13. Install the brake drum (3).
14. Install the tire and wheel assembly (1) See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels -
Installation. Install and tighten the wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
15. Slowly rotate the rear wheel and verify that the brake drum lightly drags on the shoes.
16. Lower the vehicle.
