Service and Repair of Brake Caliper in PT Cruiser L4-24L Turbo
7. Remove the brake pedal holding tool.
8. Bleed the caliper as necessary. See: Brake Bleeding/Service and Repair
9. Road test the vehicle and make several stops to wear off any foreign material on the brakes and to seat the brake shoes.
Rear
INSTALLATION
CAUTION: When installing new brake components, be sure to use correct parts. Parts designed for BR4 Performance Brake System must not
be mixed with other brake systems. These parts, similar in appearance, can be easily identified. See: Description and Operation
1. If not already present, completely retract the caliper piston back into the piston bore of the caliper. Use a C-clamp to retract the piston. Place a
wood block over the piston before installing the C-clamp to avoid damaging the piston.