PT Cruiser L4-2.4L Turbo (2009)
Hydraulic Control Assembly - Antilock Brakes: Removal and Replacement
Integrated Control Unit (ICU) - Removal
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Technician Safety Information See: Service Precautions/Vehicle Damage Warnings .
1. Remove the air cleaner housing.See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service
and Repair/Air Cleaner Body - Removal
2. Remove the battery. . See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery - Removal
3. Disconnect the vehicle wiring harness connector (2) at the brake fluid level switch in the master cylinder brake fluid reservoir (1).
4. Non-Turbo Engine - Remove the two bolts (1) fastening the Totally Integrated Power Module (TIPM) and mounting bracket (2) in place.
