PT Cruiser L4-2.4L Turbo (2009)
Coolant Line/Hose: Service and Repair
Water Pump Inlet Tube - Removal
WATER PUMP INLET TUBE
The water pump inlet tube connects the water pump to the radiator and heater core. This tube is sealed by an O-ring and held in place by fasteners to the
block.
CAUTION: Do not use any sharp tools to remove hoses from inlet tube. This may cause the tube to leak.
1. Drain cooling system See: Service and Repair/Cooling System.
2. Remove upper radiator closure panel and center brace See: Body and Frame/Radiator Support/Service and Repair/Radiator Upper Crossmember -
Removal.
3. Remove lower radiator hose and heater return hose from the inlet tube (3).
4. Remove the inlet tube to block bolts.
5. Rotate tube while removing from the engine block.
