PT Cruiser L4-2.4L Turbo (2009)
CAUTION: Ensure that NONE of the pistons are at top dead center when installing the camshafts.
1. Lubricate all camshaft bearing journals, rocker arms and camshaft lobes.
2. Install all rocker arms in original positions, if reused.
3. Position camshafts on cylinder head bearing journals. Install right and left camshaft bearing caps No. 2 - 5 and right No. 6. Tighten M6 fasteners
to 12 Nm (105 in. lbs.) in the sequence shown.
4. Apply Mopar(R) Gasket Maker to No. 1 and No. 6 bearing caps. Install bearing caps and tighten M8 fasteners to 28 Nm (250 in. lbs.).
