PT Cruiser L4-2.4L Turbo (2009)
CAUTION: Use extreme care when handling crankshaft. Target ring damage can occur if crankshaft is mis-handled.
22. Lift out crankshaft from cylinder block. Do not damage the main bearings or journals when removing the crankshaft.
23. Remove the target ring mounting screws and discard.
24. Remove the target ring from the crankshaft.
Crankshaft - Installation
INSTALLATION
CRANKSHAFT MAIN BEARING LOCATION
CAUTION: The upper and lower thrust bearing halves are NOT interchangeable. Make certain the bearing half with the oil groove and hole is
installed in the engine block.
The crankshaft is supported in five main bearings. All upper bearing shells in the crankcase have oil grooves and holes. All lower bearing shells have oil
grooves and holes. Crankshaft end play is controlled by a flanged bearing on the number three main bearing journal.
