PT Cruiser L4-2.4L Turbo (2009)
Crankshaft Main Bearing: Specifications
MAIN BEARING
Main Bearing Journal Diameter................................................................................................................................59.992 - 60.008 mm (2.362 - 2.3625 in.)
Journal Out-of-Round (Max.)..............................................................................................................................................................0.0035 mm (0.0003 in.)
Journal Taper (Max.).............................................................................................................................................................................0.007 mm (0.0001 in.)
End Play..........................................................................................................................................................................0.09 - 0.24 mm (0.0035 - 0.0094 in.)
Wear Limit................................................................................................................................................................................................0.38 mm (0.015 in.)
Main Bearing Diametrical Clearance..........................................................................................................................0.018 - 0.062 mm (0.0007 - 0.0024 in.)
MAIN BEARING CAP
Tighten bolts (1-10) again to 41 Nm (30 ft. lbs.) in sequence shown.
Install main bearing bed plate to engine block bolts (11-20), and torque each bolt to 28 Nm (250 in. lbs.) in sequence shown.
Tighten bolts (1-10) to 75 Nm (55 ft. lbs.) in sequence shown.
Tighten bolts (11-20) again to 28 Nm (250 in. lbs.) in sequence shown.
