PT Cruiser L4-2.4L Turbo (2009)
CAUTION: Care must be taken not to damage the fractured rod and cap joint surfaces, as engine damage may occur.
NOTE: On Turbocharger equipped engines, be careful not to damage the oil jet (2) when removing piston/connecting rod.
9. To protect crankshaft journal and fractured rod surfaces, install Connecting Rod Guides 8189 onto connecting rod. Carefully push each piston and
rod assembly out of cylinder bore.
10. Remove Connecting Rod Guides 8189, connecting rod guides and re-install bearing cap on the mating rod.
NOTE: Piston and rods are serviced as an assembly.
11. Repeat procedure for each piston and connecting rod assembly.
12. Remove piston ringsSee: Piston Ring/Service and Repair/Removal and Replacement/Piston Ring(s) - Removal.
Piston and Connecting Rod - Installation
INSTALLATION
