PT Cruiser L4-24L Turbo (2009) | Idler Pulley Removal | Engine Repair
Idler Pulley: Service and Repair
Accessory Drive Idler Pulley - Installation
INSTALLATION
1. Position pulley (2) in mounting position. Install fastener securing idler pulley (1) to front of engine. Torque fastener to 28 Nm (250 in. lbs.).
2. Install accessory drive belt See: Drive Belt/Service and Repair/Removal and Replacement/Serpentine Accessory Drive Belt - Installation.
3. Install belt splash shield.
4. Lower vehicle.
5. Connect negative battery cable.
