PT Cruiser L4-2.4L Turbo (2009)
3. Assemble pump body (2) to block (1) and tighten screws to 12 Nm (105 in. lbs.).
4. Rotate pump by hand to check for freedom of movement.
5. Evacuate air and refill cooling system.See: Procedures/Water and Power Steering Pump Assembly - Coolant Air Evacuation
6. Pressurize cooling system to 103 Kpa (15 psi) with pressure tester and check water pump shaft seal and O-ring for leaks.
7. Install rear timing belt cover and camshaft sprockets See: Timing Components/Timing Cover/Service and Repair/Engine Timing Cover(s) -
Installation.
8. Install timing belt See: Timing Components/Timing Belt/Service and Repair/Timing Belt & Sprockets - Installation
