PT Cruiser L4-2.4L Turbo (2009)
NOTE: Illustration shown with front floor carpet removed for clarity.
1. Position the right floor distribution duct (2) into the vehicle.
2. Engage the right floor distribution duct to the right rear intermediate floor duct (3) and the outlet located at the top of the HVAC housing (1).
3. Install the screw (4) that secures the right floor distribution duct to the right side of the HVAC housing. Tighten the screw to 2 Nm (17 in. lbs.).
4. Install the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel -
Installation.
LEFT FLOOR DISTRIBUTION DUCT
1. Position the left floor distribution duct (1) onto the left side of the HVAC housing (2) and engage the duct to the outlet located at the top of the
HVAC housing.
2. Install the steering column opening cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Installation.
RIGHT REAR FLOOR DUCT
