chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Tune-up and Engine Performance Checks > < Wheel Alignment|Page 936
Page 2
background image

3. When measuring, maximum left-to-right differential is not to exceed 10 mm (0.39 in.).
4. Compare the measurements to specifications listed in the following CURB HEIGHT SPECIFICATIONS chart.

5. If curb height is found to be out of specification and there is no sign of excessive body damage, curb height can be changed by replacing the

applicable spring with a spring offering a different check load. See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Removal and Replacement/Front Strut / Shock/Removal See: Steering and Suspension/Suspension/Suspension
Spring ( Coil / Leaf )/Service and Repair/Rear Suspension Coil Spring(s) - Removal 

CURB HEIGHT SPECIFICATIONS

Tune-up and Engine Performance Checks > < Wheel Alignment|Page 936