PT Cruiser L4-2.4L Turbo (2009)
Hose/Line HVAC: Service and Repair
A/C Discharge Line - Removal
REMOVAL
WARNING: Review safety precautions and warnings before performing this procedure See: Heating and Air Conditioning/Service
Precautions/Warning and See: Heating and Air Conditioning/Service Precautions/Caution . Failure to follow these instructions may
result in possible serious or fatal injury.
1. Recover the refrigerant from the refrigerant system See: Heating and Air Conditioning/Service and Repair/Refrigerant System Recovery.
2. Remove the upper radiator support See: Body and Frame/Radiator Support/Service and Repair/Radiator Upper Crossmember - Removal.
3. Remove the bolt (2) that secures the A/C discharge line (1) to the A/C compressor (3).
4. Disconnect the A/C discharge line from the A/C compressor and remove and discard the O-ring seal.
5. Install plug in, or tape over the opened discharge line fitting and the compressor discharge port.
6. Remove the nut that secures the A/C discharge line (3) to the A/C condenser (1).
7. Disconnect the A/C discharge line from the A/C condenser and remove and discard the O-ring seal.
8. Install plug in, or tape over the opened discharge line fitting and the condenser port.
