PT Cruiser L4-2.4L Turbo (2009)
7. Lubricate a new rubber O-ring seal with clean refrigerant oil and install it onto the discharge line fitting. Use only the specified O-ring as it is made
of a special material for the R-134a system. Use only refrigerant oil of the type recommended for the A/C compressor in the vehicle.
8. Connect the A/C discharge line (1) to the A/C compressor (3).
9. Install the bolt (2) that secures the A/C discharge line to the A/C compressor. Tighten the bolt to 12 Nm (108 in. lbs.).
10. Install the upper radiator support See: Body and Frame/Radiator Support/Service and Repair/Radiator Upper Crossmember - Installation.
11. Evacuate the refrigerant system See: Heating and Air Conditioning/Service and Repair/Refrigerant System Evacuate.
12. Adjust the refrigerant oil level See: Heating and Air Conditioning/Service and Repair/Refrigerant Oil Level.
13. Charge the A/C system See: Heating and Air Conditioning/Service and Repair/Refrigerant System Charge.
