PT Cruiser L4-2.4L Turbo (2009)
12. Lift the cooling module out of its lower mounts and carefully tip the top toward the front of the vehicle. DO NOT FORCE IT.
13. Remove the remaining four screws (1) fastening the radiator fan to the cooling module. Remove the fan.
14. Remove the clamp securing the return hose (3) to the pump reservoir (1), then remove the hose from the reservoir fitting. Cap off the hose end and
reservoir fitting.
15. Remove the bolt securing the pressure hose (2) routing clamp to the engine.
16. Back out the tube nut (5) securing the pressure hose to the power steering pump (6) and remove the hose from the pump. Cap off the hose end and
pump pressure port.
17. Raise the vehicle.