PT Cruiser L4-2.4L Turbo (2009)
6. Install the four bolts fastening the A/C compressor (1) to the engine. Tighten the mounting bolts to 28 Nm (250 in. lbs.).
7. Install the A/C compressor wiring connectors.
8. Install the A/C drive belt. See: Drive Belt/Service and Repair/Removal and Replacement/Serpentine Accessory Drive Belt - Installation
9. Position the drive-belt splash shield (3) and install the fasteners (4) securing it to the body (2).
10. Install the fastener (5) securing the drive belt splash shield (3) to the front suspension crossmember (6).
11. If previously removed, install the fasteners securing the front fascia (1) to the body lower reinforcement.
