PT Cruiser L4-2.4L Turbo (2009)
25. Connect the radiator fan wiring connector (1).
26. Fill the cooling system See: Engine, Cooling and Exhaust/Cooling System/Service and Repair/Cooling System.
27. Fill and bleed the power steering system. See: Steering and Suspension/Steering/Service and Repair/Steering - Power Steering System Bleeding
28. Check for leaks.
Return Hose
2.4L TURBO
1. Slide a hose clamp onto the power steering fluid reservoir end of the return hose (4) far enough to clear the molded fitting on the reservoir once the
hose is installed.
2. Install the return hose into the engine compartment from the top. Place the reservoir end of return hose (4) onto the molded fitting on the fluid
reservoir (1).
3. Expand the hose clamp and slide it onto the fluid reservoir fitting. Secure the clamp once it is past bead formed into the fluid reservoir fitting.
