PT Cruiser L4-2.4L Turbo (2009)
3. Expand the hose clamp at the fluid reservoir and slide it over the hose and fitting. Secure the clamp once it is past the bead formed into the fluid
reservoir fitting.
4. Place the pump end of the supply hose (3) onto the pump (2) supply fitting. Expand the hose clamp (1) and slide it over the hose and pump supply
fitting. Secure the clamp once it is past the bead formed into the fluid supply fitting.
CAUTION: Make sure the hose routing is above the engine timing chain cover. The power steering fluid supply hose must remain clear of any
unfriendly surface that can cause possible damage to it.
5. Install the radiator closure panel and fasten (1) it in place.
