PT Cruiser L4-2.4L Turbo (2009)
Power Distribution Module: Description and Operation
Totally Integrated Power Module (TIPM) - Operation
OPERATION
All of the current from the generator cable connection goes to the battery through a 10 gauge fusible link that is secured with a nut to the positive battery
terminal at the starter. The TIPM houses up to ten six fuse cartridges, which replace all in-line fusible links. The TIPM also houses up to twelve
blade-type fuses, up to two full International Standards Organization (ISO) relays, and up to eight mini International Standards Organization (ISO)
relays. Internal connection of all the TIPM circuits is accomplished by an intricate network of hard wiring and bus bars. Refer to Wiring Diagrams for
complete circuit diagrams.
The fusible link, fuses and relays are available for service replacement. The TIPM unit cannot be repaired and is only serviced as a unit with the engine
compartment wire harness. If the TIPM is inoperative or damaged, the engine compartment wire harness assembly must be replaced.
