PT Cruiser L4-2.4L Turbo (2009)
3. While holding the pump module in position, install lock ring and use special tool #9340 to tighten lock ring.
4. Install fuel tank, See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Removal and Replacement/Fuel Tank - Installation.
5. Lower vehicle.
6. Install the negative battery cable.
7. Install the air cleaner lid, connect the inlet air temperature sensor and makeup air hose.
8. Fill fuel tank with clean fuel. Use the Scan Tool to pressurize the system and check for leaks.
