PT Cruiser L4-2.4L Turbo (2009)
Air Bag: Service and Repair
Knee Blocker Air Bag - Installation
INSTALLATION
1. Connect the knee blocker airbag electrical connector.
2. Place the knee blocker airbag trim cover (1) on the lower hooks before placing into the instrument panel cavity.
3. Install the two knee blocker airbag screws (3) and tighten to 10.5 Nm (95 in. lbs.).
4. Reach up through the instrument panel access hole (1) and fasten the upper hook and loop retainers for the knee blocker airbag trim cover (4).
5. Install the two trim cover screws (3), one on each side of the column.
