PT Cruiser L4-2.4L Turbo (2009)
NOTE: The knee blocker airbag trim cover will come off the lower hooks at this time.
9. Disconnect the knee blocker airbag electrical connector and remove from vehicle.
Knee Blocker Air Bag - Installation
INSTALLATION
1. Connect the knee blocker airbag electrical connector.
2. Place the knee blocker airbag trim cover (1) on the lower hooks before placing into the instrument panel cavity.
3. Install the two knee blocker airbag screws (3) and tighten to 10.5 Nm (95 in. lbs.).
