PT Cruiser L4-2.4L Turbo (2009)
Impact Sensor: Service and Repair
Impact Sensor - Installation
INSTALLATION
FRONT MOUNTED
LEFT FRONT SATELLITE ACCELERATION SENSOR
1. Position SAS (1) on side radiator support and install the two retaining screws (2). Tighten the screws to 10.5 Nm (92 in. lbs.).
2. Connect the SAS electrical connector (3).
3. Install the front lower grille See: Body and Frame/Grille/Service and Repair/Grille - Installation.
WARNING: Do not connect the battery negative cable See: Testing and Inspection/Restraints . Serious or fatal injury may result if the system test
is not performed first.
RIGHT FRONT SATELLITE ACCELERATION SENSOR
1. Position SAS (1) on side radiator support and install the two retaining screws (3). Tighten the screws to 10.5 Nm (92 in. lbs.).
2. Connect the SAS electrical connector (2).
3. Install the front lower grille See: Body and Frame/Grille/Service and Repair/Grille - Installation.
WARNING: Do not connect the battery negative cable See: Testing and Inspection/Restraints . Serious or fatal injury may result if the system test
is not performed first.
SIDE MOUNTED
