PT Cruiser L4-2.4L Turbo (2009)
Seat Belt Height Adjuster: Service and Repair
Seat Belt Turning Loop Adjuster - Installation
INSTALLATION
WARNING: Front seat belt assemblies must be replaced after a collision.
NOTE: Front seat belt height adjuster must be in the lowest position when Installing adjuster knob.
1. Place into position the front seat belt height adjuster (1).
2. Install bolts attaching the front seat belt height adjuster (1) to B-pillar. Tighten bolts to 40 Nm (30 ft. lbs.).
3. Install B-pillar trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim Panel-Installation.
