PT Cruiser L4-2.4L Turbo (2009)
Impact Sensor: Description and Operation
Impact Sensor - Operation
OPERATION
The Satellite Acceleration Sensor (SAS) provides verification of the direction and severity of the side impact to the Occupant Restraint Controller
(ORC). The ORC controls the front and both the right and the left seat airbags. In the event of a front or side impact, the ORC will send an electronic
signal to deploy the appropriate airbag (front driver and passenger or side seat airbags). The SAS periodically transmit the acceleration data to the ORC
by modulation of the current on the power supply.
The accelerometer pulses are sent to a microprocessor, which contains a decision algorithm. When an impact is severe enough to require airbag
protection, the ORC microprocessor sends a signal to deploy the side airbag that completes the electrical circuits to the right or left side airbag. The ORC
is calibrated for the specific vehicle and reacts to the severity and direction of the impact.
The ORC microprocessor continuously monitors all of the passive restraint system electrical circuits to determine the system readiness. If the ORC
detects a system fault, it sets a Diagnostic Trouble Code (DTC) and controls the airbag warning indicator operation accordingly. The side impact sensors
receive battery current and ground through dedicated driver and passenger sensor signal and ground circuits from the ORC. If the sensor is dropped it
must be replaced. Disconnect the battery or remove both airbag fuses before servicing impact sensors.
