PT Cruiser L4-2.4L Turbo (2009)
1. Position the Satellite Acceleration Sensor (SAS) (1) in B-pillar (electrical connector (3) facing down in vehicle) and install the retaining nuts (2).
Tighten the nuts to 8 Nm (70 in. lbs.).
2. Connect the SAS electrical connector (3).
3. Install the lower B-pillar trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim
Panel-Installation.
WARNING: Do not connect the battery negative cable See: Testing and Inspection/Restraints . Serious or fatal injury may result if the system test
is not performed first.
