PT Cruiser L4-2.4L Turbo (2009)
Horn Switch: Service and Repair
Horn Switch - Installation
INSTALLATION
1. Install horn pads. Ensure the white pads are installed on the left side of the steering wheel and the black pads are on the right. Also be sure that the
wires are installed inside of the driver airbag connecting posts.
2. Connect the electrical connector to the clockspring.
3. Connect the speed control connector (if equipped).
4. Install the steering wheel rear cover.
5. Install the steering wheel assembly. See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Installation.
6. Install the driver airbag. See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Driver Air Bag - Installation.
7. Connect the battery negative cable.
