PT Cruiser L4-2.4L Turbo (2009)
Wiper Switch: Service and Repair
Right Multifunction Switch - Installation
INSTALLATION
1. Position the right multi-function switch to the back of the Steering Column Control Module (SCCM) (3) and connect the switch connector (1).
2. Align switch with the SCCM (2) and slide toward steering column.
3. Install the screw (3) that secures the switch (2) to the SCCM (1).
4. Install the upper and lower shrouds onto the steering column See: Steering and Suspension/Steering/Steering Column/Steering Column
Cover/Service and Repair/Steering Column Shroud - Installation and See: Steering and Suspension/Steering/Steering Column/Steering Column
Cover/Service and Repair/Steering Column Shroud - Installation.
5. Connect the battery negative cable.