PT Cruiser L4-2.4L Turbo (2009)
14. On vehicles equipped with crossmember mounted power steering fluid coolers:
a. Remove the cooler tube from the right routing clip on the gear.
b. Remove the two screws securing the cooler (2) to the front suspension crossmember. Allow the cooler to hang out of the way.
15. Remove the mounting nuts (1, 3), then the pencil strut (2) from the right front corner of the crossmember and body of the vehicle. Remove the
washer (4) behind the strut from the torque strut (5) bolt.
16. Remove the one fastener (2) securing the wheel house splash shield (1) to the drive belt splash shield (3).