PT Cruiser L4-2.4L Turbo (2009)
9. Using a soft face hammer, tap the front suspension crossmember back-and-forth or side-to-side until it is aligned with the previously made
positioning marks (3) on the body of the vehicle. Once the front suspension crossmember is correctly positioned, tighten the two crossmember
mounting bolts through the lower control arm rear isolator bushings to a torque of 250 Nm (185 ft. lbs.), then tighten the four remaining
crossmember mounting bolts to a torque of 153 Nm (113 ft. lbs.).
10. Install the engine torque strut (2) to the crossmember (1). To properly align and tighten the torque strut, . See: Engine, Cooling and
Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Engine Mount/Engine Torque Strut/Service and Repair/Procedures