PT Cruiser L4-2.4L Turbo (2009)
6. Remove the rear parking brake cables (3) from the parking brake cable equalizer (2).
7. Raise and support the vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
NOTE: Perform 8 through 23 on each side of the vehicle.
8. Remove the wheel mounting nuts (3), then the rear tire and wheel assembly.
9. Remove the bolt securing the disc brake flex hose to the axle trailing arm.
10. Remove the disc brake caliper guide pin bolts (4), then the caliper (1) from the disc brake adapter (3).
11. Hang the caliper (1) out of the way using a wire hanger or bungee cord. Do not allow the caliper to hang by the flex hose; damage to the hose
may occur.
12. Remove the brake rotor retaining clips (9), then the brake rotor (8).
13. Remove the dust cap (10) from the hub and bearing (2).
14. Remove the hub nut (11), then slide the hub and bearing (2) from the spindle (6).