PT Cruiser L4-2.4L Turbo (2009)
a vise.
1. Install the Receiver Cup (3), Special Tool 9356-4, into the cup of the Ball Joint Press (6), Special Tool C-4212F, and tighten the set screw.
2. Install the Remover (1), Special Tool 9356-2, on the tip of the Ball Joint Press screw-drive.
3. Install the Reaction Plate (1), Special Tool 9356-3, over the end of the control arm (3) so that the arrows on the Reaction Plate point toward the
bushing flange (2) on the bottom of the arm as shown.
