PT Cruiser L4-2.4L Turbo (2009)
7. Place the vehicle on an alignment rack or drive-on hoist.
8. With the suspension at curb height, tighten the link mounting bolt (6) at the body bracket (4) to 92 Nm (68 ft. lbs.).
Upper
UPPER
CAUTION: When installing the link, DO NOT attempt to turn the ball joint end of the link independently.
1. Insert the upper link (3) into the body bracket (7). Make sure the ball joint end is positioned properly for mounting to the bell crank.
2. Install the bolt (1) and flag nut (2) securing the link to the bracket. Do not fully tighten at this time.