PT Cruiser L4-2.4L Turbo (2009)
Stabilizer Link: Service and Repair
Rear Suspension Stabilizer Bar Link - Installation
INSTALLATION
NOTE: Stabilizer bar link fasteners need to be tightened to specifications when the vehicle is at curb height.
1. Install the stabilizer bar link (1), starting the bolt retaining the link to the frame rail. Do not tighten the bolt at this time.
2. Install the lower bolt and nut attaching the stabilizer bar link (1) to the stabilizer bar (2). Do not tighten the bolt and nut at this time.
3. Install the tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation.
Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
4. Lower the vehicle.
5. Tighten the stabilizer bar link upper bolt and lower bolt to 65 Nm (48 ft. lbs.).
