PT Cruiser L4-2.4L Turbo (2009)
NOTE: If the coil spring has been removed from the spring compressor, proceed with the next step, otherwise, proceed with step 3.
1. Place the coil spring (2) in the spring compressor (4) following the manufacturers instructions. Before compressing the spring, rotate the spring so
the end of the top coil (1) is directly in front away from the compressor.
2. Slowly compress the coil spring until enough room is available for strut assembly reassembly.
3. Install the lower spring isolator (2) on the lower spring seat of the strut (1).