PT Cruiser L4-2.4L Turbo (2009)
18. Install the screw (2) securing the brake flex hose bracket (and wheel speed sensor cable if equipped) (1) to the vehicle body above the leading end
of the axle trailing arm (3).
19. Install tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Install
and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
20. Lower the vehicle.
21. Place the vehicle on an alignment rack or drive-on hoist.
22. With the vehicle at curb height, tighten both trailing arm to mounting bracket pivot thru-bolts (1) to 122 Nm (90 ft. lbs.).
