PT Cruiser L4-2.4L Turbo (2009)
Shift Interlock Cable: Service and Repair
Shift Interlock Cable - Installation
INSTALLATION
CAUTION: When installing interlock cable assembly, care must be taken not to bend exposed cable wire and slug at shifter end of cable.
Ignition Key/Switch Positions
1. Route interlock cable through hole in instrument panel below steering column and around to gear shifter assembly.
2. Turn the ignition key to the "OFF" or "ON/RUN" position.
3. Install the interlock cable (2) into the interlock housing at the steering column. Verify the cable snaps into the housing and is fully seated.
4. Return the ignition key to the "LOCK" position.
