PT Cruiser L4-2.4L Turbo (2009)
6. Remove two pedal assembly bracket to instrument panel nuts.
7. Remove four brake booster/pedal bracket-to-dash panel nuts.
8. From under the hood, pull brake master cylinder/booster far enough forward to obtain pedal to bracket stud clearance.
9. Remove the pedal bracket assembly (1).
.
10. Remove pedal pivot shaft and remove brake and clutch pedals (3).
11. Remove the interlock/upstop switch assembly (1,2) from the brake/clutch pedal bracket assembly by depressing the four plastic wing tabs on each
switch.