PT Cruiser L4-2.4L Turbo (2009)
Heated Glass Element Switch: Service and Repair
Rear Defogger Switch - Installation
INSTALLATION
1. Position the accessory switch bezel (2) onto the back of the instrument panel center bezel (3).
2. Install the two screws (1) that secure the accessory switch bezel to center bezel. Tighten the screws to 2 Nm (17 in. lbs.).
3. Install the center bezel onto the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Bezel - Installation.
4. Reconnect the negative battery cable.
