PT Cruiser L4-2.4L Turbo (2009)
Power Window Switch: Service and Repair
Power Window Switch - Installation
INSTALLATION
FRONT
1. Install switch into bezel.
2. Connect electrical harness connector to switch.
3. Install bezel. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Cluster Bezel -
Installation
4. Connect battery negative cable.
REAR - SEDAN ONLY
1. Connect electrical harness connector to switch.
2. Align switch and press into position.
3. Connect battery negative cable.
