PT Cruiser L4-2.4L Turbo VIN G (2004)
Speaker: Service and Repair
Speaker Replacement - Instrument Panel
INSTRUMENT PANEL SPEAKER
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove instrument panel top cover.
Fig. 18 Instrument Panel Speaker
3. Remove speaker retaining screws.
4. Remove speaker and disconnect wire harness connector.
INSTALLATION
1. Connect wire harness connector to speaker.
2. Install speaker screws. Tighten to 2 Nm (20 in. lbs.).
3. Install instrument panel top cover.
4. Connect the battery negative cable.
