PT Cruiser L4-2.4L Turbo VIN G (2004)
Front Fender Liner: Service and Repair
SPLASH SHIELD - FRONT WHEELHOUSE
NOTE: Right hand splash shield shown in illustration. Left hand similar.
REMOVAL
1. Hoist and support the vehicle.
2. Remove the front wheel from the side of the vehicle being serviced.
3. Remove the push-pin fasteners that secure the front wheelhouse splash shield (2) to the frame rail forward of suspension.
4. Remove the push-pin fasteners that secure the front wheelhouse splash shield to frame rail rearward of suspension.
5. Remove the screws that secure the front wheelhouse splash shield to the front fender (1) and remove the splash shield.
INSTALLATION
1. Position the front wheelhouse splash shield (2) to the vehicle.
2. Install the screws that secure the front wheelhouse splash shield to the front fender (1).
3. Install the push-pin fasteners that secure the front wheelhouse splash shield to frame rail rearward of suspension.
4. Install the push-pin fasteners that secure the front wheelhouse splash shield to the frame rail forward of suspension.
5. Install the front wheel.
6. Lower the vehicle.
