PT Cruiser L4-2.4L Turbo VIN G (2004)
6. Separate each ball joint stud (4) from the steering knuckle (1) by prying down on lower control arm (3) and up against the ball joint boss on the
steering knuckle (1).
7. Remove the two screws securing the cooler to the front suspension crossmember (4). They are located behind the cooler and can be accessed from
above. Allow the cooler to hang out of the way.
8. Using wire or a bungee cord, support and tie off the power steering gear (3) to the underbody of the vehicle, so when the crossmember (4) is
lowered, the gear does not fall away, being held to the vehicle by only the steering column coupling and the fluid hoses.
9. Loosen and remove the four bolts attaching the power steering gear to the front suspension crossmember. Remove the power steering gear from
the front suspension crossmember.