PT Cruiser L4-2.4L Turbo VIN G (2004)
Power Seat Switch: Service and Repair
REMOVAL
1. Open hood.
2. Disconnect and isolate the battery negative cable.
3. Remove two screws to left cushion side shield.
4. Disconnect wiring from switch.
5. Remove attaching screws and switch from bezel.
INSTALLATION
1. Install attaching switch and two attaching screws to bezel.
2. Connect wiring from switch.
3. Install screws to left cushion side shield.
4. Connect the battery negative cable.
5. Close hood.
6. Verify vehicle and system operation.
