PT Cruiser L4-2.4L Turbo VIN G (2004)
Rear Door Window Glass Weatherstrip: Service and Repair
Rear Door Inner Belt Weatherstrip
REAR DOOR INNER BELT WEATHERSTRIP
REMOVAL
1. Remove door trim panel.
2. Remove inner belt weatherstrip (10) from door. If necessary, use a rubber mallet and a block of wood, tapping upward at each clip attaching the
molding to the door.
INSTALLATION
1. Align the weatherstrip to the B and C pillars. Push down on weatherstrip to engage channel to door panel.
2. Install door trim panel.
