PT Cruiser L4-2.4L Turbo VIN G (2004)
Rear Door Window Glass Weatherstrip: Service and Repair
Rear Door Glass Run Weatherstrip
REAR DOOR GLASS RUN WEATHERSTRIP
REMOVAL
1. Remove door trim panel, water shield as necessary.
2. Remove door glass.
3. Pull weatherstrip from flange.
4. Pull run weatherstrip from window frame channel.
INSTALLATION
1. Clean butyl material from door flange area.
2. Place door run weatherstrip in position on window frame channel corners first.
3. Push door run weatherstrip into window frame channel.
4. Install door glass.
5. Install pull cup support bracket, water dam, and door trim panel.
